Home » Juniper » Routers » Juniper ERX Series Routers

Used & Refurbished Juniper ERX Series Routers

Juniper ERX Series Routers

With an unsurpassed combination of powerful hardware packet processing and the flexibility of JUNOSe software, the E-series portfolio provides the performance, scale, and "always on" availability required at the network edge. Service providers worldwide rely on the E-series platforms to cost-effectively address subscriber management, edge routing, and service aggregation requirements.

The E-series consists of six "application-optimized" platforms designed specifically to address the unique requirements of carrier-scale multiplay deployments.

CPS Datacom carries quality pre-owned, refurbished and used Juniper ERX series routers, modules and accessories.

To request a quote, add your choice to the online quote cart or call us at 714 508 0000 for assistance.

Datasheet:



  • Juniper ERX Series Base Systems
    • Part Number Description Get Quote
    BASE-14 14 Slot ERX-1400 Base System
    BASE-1440 14 Slot Base System for 40G fabric
    BASE-7 7 Slot ERX-700 Base System
    ES2-120FTRAY-FRU E120 fan tray.
    ES2-120G-SFM E120 120Gb switch fabric module (SFM). Supported in the E120 chassis only.
    ES2-120G-SRP E120 120Gb switch route processor (SRP). Supported in the E120 chassis only
    ES2-BSLM6-SYS E120 6-slot base chassis.
    EX3-310AC1G-SYS ERX-310 AC Base System - includes chassis, midplane, fan tray & controller, (1) AC power supply (requires region-specific power cord), AC PDU with redundant connections to support a 2nd power supply (sold separately), SRP (1G memory), SRP IOA, edge services software license, and 2k BRAS user license.
    EX3-310BRASAC-BND ERX-310 AC BRAS Bundle: ERX 310 AC Base System [ includes chassis, midplane, fan tray & controller, (1) AC power supply (requires region-specific power cord), AC PDU with redundant connections to support a 2nd power supply (sold separately), 1G SRP, SRP IOA, edge services software license], (1) ATM/GE Combo line card (ERX-OCXGE-MOD), (1) 2xOC3 ATM + 1xGE IOA (ERX-2OC3GE-IOA), 4k BRAS user license. SFPs ordered separately.
    EX3-310BRASDC-BND ERX-310 DC BRAS Bundle: ERX 310 DC Base System [includes chassis, midplane, fan tray & controller, DC PDU with redundant connections, SRP, SRP IOA, edge services software license], (1) ATM/GE Combo line card (ERX-OCXGE-MOD), (1) 2xOC3 ATM + 1xGE IOA (ERX-2OC3GE-IOA), 4k BRAS user license. SFPs ordered separately.
    EX3-310DC1G-SYS ERX-310 DC Base System - includes chassis, midplane, fan tray & controller, DC PDU with redundant connections, SRP (1G memory), SRP IOA, edge services software license, and 2k BRAS user license.
    EX3-310HDEAC-BND ERX-310 AC LNS Bundle: ERX 310 AC Base System, 1G SRP, SRP IOA, JUNOSe edge services software license, (1) High Density Ethernet line module (ERX-HDE-MOD), (1) 8-port GE IOA (ERX-8GEHDE-IOA), 4k BRAS user license and 4K LNS session license. SFPs ordered separately.
    EX3-310HDEDC-BND ERX-310 DC LNS Bundle: ERX 310 DC Base System, 1G SRP, SRP IOA, JUNOSe edge services software license, (1) High Density Ethernet line module (ERX-HDE-MOD), (1) 8-port GE IOA (ERX-8GEHDE-IOA), 4k BRAS user license and 4K LNS session license. SFPs ordered separately.
    EX3-CH310-FRU ERX-310 Chassis: includes chassis, midplane, and fan tray.
  • Juniper ERX Series SRP Options
    • Part Number Description Get Quote
    ERX-10G1GECC-SRP 10Gb Switch & Route Processor: 10Gb SRP with 1GB ECC memory. Includes a 1GB flash card.
    ERX-10G2GECC-SRP 10Gb Switch & Route Processor: 10Gb SRP with 2GB ECC memory. Includes a 1GB flash card.
    ERX-2GE-IOA 2+2 Port GE IOA: supports up to (4) pluggable SFP adapters (RX-550M-SFP, RX-10KM-SFP, RX-70KM-SFP). Works with ERX-GE-MOD line module and requires the purchase of at least (1) pluggable SFP adapter per IOA, (2 or more) SFP adapters per IOA for a redundant (APS-like) configuration.
    ERX-40G2GEC2-SRP 40Gb Switch & Route Processor: 40Gb SRP with 2GB of ECC2 memory. Includes a 1GB flash card.
    ERX-5G2GECC-SRP 5Gb Switch & Route Processor: 5Gb SRP with 2GB ECC memory. Includes a 1GB flash card.
    EX3-1GSRP-MOD ERX-310 SRP Module - SRP module for the ERX-310, used with EX3-310ACIG-SYS and EX3-310DC1G-SYS systems and requires EX3-SRP-IOA. 1G of on board SRP memory.
    EX3-SRP-IOA ERX-310 SRP IOA: SRP IOA module for the EX3-BS310AC-SYS and EX3-BS310DC-SYS systems, works with EX3-SRP-MOD.
    SRP_I/O Switch & Route Processor Interface Adapter Supports physical connections for 10/100 Base-T network adapter, RS232 async management port, external clock source input and alarm relay contacts. Supports the 5G, 10G, and 40G SRP modules.
  • Juniper ERX Series SRP Upgrade Options
    • Part Number Description Get Quote
    ERX-10SRP40R-UPG Redundant upgrade package includes (2) 40Gb SRPs with 2GB ECC memory and a 1GB flash card each as well as an SRP_I/O and a BASE-1440 chassis. This upgrade package is for customers that own a redundant system using (2) 10Gb SRPs with or without ECC memory and would like to upgrade to a redundant BASE-1440.
    ERX-10SRP40-UPG Non-redundant upgrade package includes (1) 40Gb SRP with 2GB ECC memory and a 1GB flash card as well as an SRP_I/O and a BASE-1440 chassis. This upgrade package is for customers that own a non-redundant system using (1) 10Gb SRP with or without ECC memory and would like to upgrade to a non-redundant BASE-1440.
    ERX-2G512SRP-UPG 2GB SRP Field Upgrade Kit: provides (4) 512MB SODIMMs to upgrade 1GB versions of the SRP-5 (ERX-5G1GECC-SRP) & SRP-10 (ERX-10G1GECC-SRP) that utilize (4) 256MB SODIMMs.
    ERX-2GSRP10R-UPG Redundant upgrade package includes (2) 10Gb SRPs with 2GB ECC memory and a 1GB flash card each as well as an SRP_I/O.
    ERX-2GSRP10-UPG Non-redundant upgrade package includes (1) 10Gb SRP with 2GB ECC memory and a 1GB flash card as well as an SRP_I/O.
  • Juniper ERX Series High Speed Line Modules
    • Part Number Description Get Quote
    CT3-12-F0 12-Port Channelized/Unchannelized T3 Frame-Based Line Module: supports (12) channelized (DS3, DS1, DS0 with HDLC framing) or (12) unchannelized T3 interfaces. Requires the T312-FO-F3-I/O. Can be used with ERX-12T3-2-1-RMD to support 1:1 and 2:1 line module redundancy.
    E3-12-F3-I/O 12-port Unchannelized E3 IOA: provides (12) E3 frame-based physical ports with BT43 SMB connections. Works with the ERX-UT3E3OCX-MOD line module. NOTE: A converter cable (ERX-12T3-CBL-ACC) can be used to convert native BT43 SMB connections to BNC connections.
    ERX-UT3E3OCX-MOD 12-port Unchannelized T3/E3 Line Module: supports (12) frame-based fractional T3 interfaces (includes T3 DSU) or (12) E3 frame-based interfaces. Requires either the T312-F0-F3-I/O for unchannelized T3 or the E3-12-F3-I/O for unchannelized E3. Can be used with ERX-12T3-2-1-RMD to support 1:1 and 2:1 line module redundancy.
    T312-F0-F3-I/O 12-Port Channelized T3 IOA: provides (12) channelized or unchannelized T3 physical ports. Works with either the CT3-12-F0 line module or the ERX-UT3E3OCX-MOD line module. NOTE: A converter cable (ERX-12T3-CBL-ACC) can be used to convert native BT43 SMB connections to BNC connections.
  • Juniper ERX Series Optical Line Modules
    • Part Number Description Get Quote
    ERX-O3O12A-MOD 4-port OC3/STM1 or 1-port OC12/STM4 or 4-port T3/DS3 ATM Line Module: supports (4) OC3/STM1 ATM or (1) OC12/STM4 ATM or (4) T3/DS3 ATM interface(s) with 256MB of memory. Requires an OC3/STM1, OC12/STM4, or T3/DS3 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1
    ERX-O3O12P-MOD 4-port OC3/STM1 or 1-port OC12/STM4 POS Line Module: supports (4) OC3/STM1 POS or (1) OC12/STM4 POS interface(s) with 128MB of memory. Requires either an OC3/STM1 IOA or OC12/STM4 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1 line module redundancy.
    ERX-OC3M-APS-IOA 4-port OC3/STM1 MM IOA with APS: provides (4 - 4 active + 4 standby) OC3/STM1 multimode LC full duplex physical ports. Supports distances up to 2 kilometers. Works with the ERX-OCXA256M-MOD, OC3/OC12-ATM, and OC3/OC12-POS line modules.
    ERX-OC3S-APS-IOA 4-port OC3/STM1 SM IOA with APS: provides (4 = 4 active + 4 standby) OC3/STM1 single mode LC full duplex physical ports. Supports distances up to 15 kilometers. Works with the ERX-OCXA256M-MOD, OC3/OC12-ATM, and OC3/OC12-POS line modules.
    ERX-OC48ST16-IOA 1-port OC48/STM16 IOA: provides (1) OC48/STM16 LC full duplex physical port. Works with the ERX-OC48ST16-MOD line module. NOTE: the hardware is capable of supporting APS by using (2) ERX-OC48ST16-IOAs in conjunction with (1) double-wide ERX-OC48ST16-MOD line module; however, the software required to support this feature is not scheduled.
    ERX-OC48ST16-MOD 1-port OC48/STM16 POS Line Module: supports (1) OC48/STM16 POS interface. This double-wide line module is only available for the ERX-1440 and requires (2) slots within the chassis with a maximum of (2) OC48/STM16 line modules per chassis. Requires (1) ERX-OC48ST16-IOAs. Line module redundancy is not supported.
    ERX-OCXA256M-MOD 4-port OC3/STM1 or 1-port OC12/STM4 or 4-port T3/DS3 ATM Line Module: supports (4) OC3/STM1 ATM or (1) OC12/STM4 ATM or (4) T3/DS3 ATM interface(s) with 256MB of memory. Requires an OC3/STM1, OC12/STM4, or T3/DS3 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1
    OC12-LH-I/O 1-port OC12/STM4 LH IOA: provides (1) single mode OC12/STM4 SC full duplex physical port supporting distances up to 40 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
    OC12-MM_I/O 1-port OC12/STM4 MM IOA: provides (1) multimode OC12/STM4 SC full duplex physical port supporting distances up to 2 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
    OC12-SM_I/O 1-port OC12/STM4 SM IOA: provides (1) single mode OC12/STM4 SC full duplex physical port supporting distances up to 15 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
    OC3/OC12-POS 4-port OC3/STM1 or 1-port OC12/STM4 POS Line Module: supports (4) OC3/STM1 POS or (1) OC12/STM4 POS interface(s) with 128MB of memory. Requires either an OC3/STM1 IOA or OC12/STM4 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1 line module redundancy.
    OC3-4LH-I/O 4-port OC3/STM1 LH IOA: provides (4) single mode OC3/STM1 SC full duplex physical ports supporting distances up to 40 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
    OC3-4MM_I/O 4-port OC3/STM1 MM IOA: provides (4) multimode OC3/STM1 SC full duplex physical ports supporting distances up to 2 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
    OC3-4SM_I/O 4-port OC3/STM1 SM IOA: provides (4) single mode OC3/STM1 SC full duplex physical ports supporting distances up to 15 kilometers. Works with the OC3/OC12-ATM, ERX-OCXA256M-MOD, and OC3/OC12-POS line modules.
  • Juniper ERX Series Channelized Optical Line Modules
    • Part Number Description Get Quote
    COC12F0-MM-I/O 1-port Channelized OC12/STM4 MM IOA: provides (1) channelized multimode OC12/STM4 SC full duplex physical port supporting distances up to 2 kilometers. Works with the COCX/STMX-F0 line module.
    COC12F0-SM-I/O 1-port Channelized OC12/STM4 SM IOA: provides (1) channelized single mode OC12/STM4 SC full duplex physical port supporting distances up to 15 kilometers. Works with the COCX/STMX-F0 line module.
    COC3F0-MM-I/O 4-port Channelized OC3/STM1 MM IOA: provides (4) channelized multimode OC3/STM1 SC full duplex physical ports supporting distances up to 2 kilometers. Works with the COCX/STMX-F0 line module.
    COC3F0-SM-I/O 4-port Channelized OC3/STM1 SM IOA: provides (4) channelized single mode OC3/STM1 SC full duplex physical ports supporting distances up to 15 kilometers. Works with the COCX/STMX-F0 line module.
    COCX/STMX-F0 4-port OC3/STM1 or 1-port OC12/STM4 Channelized Frame-Based Line Module: supports (4) channelized (to DS0) OC3/STM1 or (1) channelized (to DS0) OC12/STM4 frame-based interfaces. Supports the following channelized interfaces: (12) T3, (336) T1, (252) E1; maximum of 2000 channels per line module. Requires channelized OC3/STM1 or OC12/STM4 IOA. Supports 1:1, 2:1, 3:1, 4:1, and 5:1 line module redundancy.
    ERX-COC12-LH-IOA 1-port Channelized OC12/STM4 LH IOA: provides (1) channelized single mode OC12/STM4 SC full duplex physical port supporting distances up to 40 kilometers. Works with the COCX/STMX-F0 line module.
    ERX-COCXPNL-IOA Redundancy Panel: redundancy IOA, which is coupled with the redundant COCX/STMX-F0 line module in redundant configurations. When using a redundancy midplane, the redundant/spare COCX/STMX-F0 line module does not require active connections on its corresponding IOA. Therefore, a redundancy IOA is coupled with the redundant COCX/STMX-F0 line module instead of an active IOA. Works with ERX-COCX-2-1-RMD and ERX-COCX-5-1-RMD redundancy midplanes.
  • Juniper ERX Series Ethernet Modules
    • Part Number Description Get Quote
    ERX-2GE-IOA 2+2 Port GE IOA: supports up to (4) pluggable SFP adapters (RX-550M-SFP, RX-10KM-SFP, RX-70KM-SFP). Works with both the ERX-GE-MOD line module and the ERX_HDE_MOD.
    ERX-2OC3GE-IOA 2+2 ATM OC3 + 1+1 Port GE IOA: supports up to (4) pluggable OC3 SFP adapters (SFP-OC3-SR, SFP-OC3-IR, SFP-OC3-LR). Supports up to (2) pluggable GE SFP adapters (RX-550M-SFP, RX-10KM-SFP, RX-70KM-SFP). Works with ERX-OCXGE-MOD line module.
    ERX-8FXSFP-IOA 8-Port 100Base-FX IOA: provides (8) 100 Fiber Fast Ethernet physical ports with SFP optics. Works with the ERX-GEFE256M-MOD line module. SFP optics (RX-FXMM-SFP and RX-FXSM-SFP) ordered separately
    ERX-8GEHDE-IOA 8 Port GE IOA: supports up to (8) pluggable SFP adapters (RX-550M-SFP, RX-10KM-SFP, RX-70KM-SFP). Works with ERX-HDE-MOD line module.
    ERX-GEFE256M-MOD 1-port GE or 8-port 10/100 FE Line Module: supports (1) Gigabit Ethernet interface or (8) 10/100 Fast Ethernet interfaces with 256MB of memory. Requires either the GE IOA (ERX-GIGESFP-IOA) with pluggable SFP adapters or the FE IOA (FE-8_I/O). Line module redundancy is not supported.
    ERX-GEFE-MOD 1-port GE or 8-port 10/100 FE Line Module: supports (1) Gigabit Ethernet interface or (8) 10/100 Fast Ethernet interfaces with 256MB of memory. Requires either the GE IOA (ERX-GIGESFP-IOA) with pluggable SFP adapters or the FE IOA (FE-8_I/O). Line module redundancy is not supported.
    ERX-GE-MOD 2-port GE Line Module: supports (2) active Gigabit Ethernet interfaces and (2) backup ports for GE redundancy. Ships with 256MB of memory. Requires the 2xGE IOA (ERX-2GE-IOA) with pluggable SFP adapters. Line module redundancy is not supported.
    ERX-GIGESFP-IOA 2-Port GE IOA: supports up to (2) pluggable SFP adapters (RX-550M-SFP, RX-10KM-SFP, RX-70KM-SFP). Works with the GE/FE-8 and ERX-GEFE256M-MOD line modules and requires the purchase of at least (1) pluggable SFP adapter per IOA, (2) SFP adapters per IOA for a redundant (APS-like) configuration.
    ERX-HDE-MOD Mod to support the high density ethernet (ERX-8GEHDE-IOA) IOA and 2 port IOA (ERX-2GE-IOA)
    ERX-OCXGE-MOD ATM-based Combo card: Ships with 256MB of memory. Requires the 2xATM/1xGE IOA (ERX-2OC3GE-IOA) with pluggable SFP adapters. Line module redundancy is not supported.
  • Juniper ERX Series Service Modules
    • Part Number Description Get Quote
    ERX-IPSEC-MOD IPSec Line Module w/encryption. Includes a license for 2,500 IPSec tunnels with JUNOSe 4.0, 4.1 and 5.0 and a license for 10 IPSec or Secure Remote Access tunnels with JUNOSe 5.1 or higher. Number of tunnels may be upgraded to a max of 5,000 IPSec and/or SRA tunnels by ordering ERX-IPSEC-LTUs or ERX-SRA-LTUs. Does not require an IOA.
    ERX-IPSECURE-MOD IPSec Line Module w/encryption. Includes a license for 2,500 IPSec tunnels with JUNOSe 4.0, 4.1 and 5.0 and a license for 10 IPSec or Secure Remote Access tunnels with JUNOSe 5.1 or higher. Number of tunnels may be upgraded to a max of 5,000 IPSec and/or SRA tunnels by ordering ERX-IPSEC-LTUs or ERX-SRA-LTUs. Does not require an IOA.
    ERX-IPSERV-MOD Service Module with 256MB: provides all of the capabilities of the existing Tunnel Service with increased session scaling (via the 256MB) and performance enhancements for increased throughput. Also includes support for NAT and firewall capabilities.
    ERX-SERVICE-MOD Service Module with 256MB: provides all of the capabilities of the existing Tunnel Service with increased session scaling (via the 256MB) and performance enhancements for increased throughput. Also includes support for NAT and firewall capabilities.
  • Juniper ERX Series Redundancy Midplane Modules
    • Part Number Description Get Quote
    ERX-12PT3E3-PNL 12-Port T3/E3 Spare Adapter. Filler for 12 Port T3/E3 Redundancy Midplane
    ERX-12T3-2-1-RMD Redundancy midplane for CT3-12-F0 and ERX-UT3E30CX-MOD line modules. Supports 1 or 2 active + 1 redundant line module; includes blank panel IOA (ERX-12PT3E3-PNL).
    ERX-COCX-2-1-RMD Redundancy midplane for channelized OCx line module. Supports 1 or 2 active + 1 redundant line module; includes blank panel IOA.
    ERX-COCX-5-1-RMD Redundancy midplane for channelized OCx line module. Supports 1, 2, 3, 4, or 5 active + 1 redundant line module; includes blank panel IOA.
    PNL-RDMD-OCX Blank panel to companion an OCx redundancy midplane
    REDMID-OC/2/1 Redundancy midplane for OC3/OC12-ATM and ERX-OCXA256M-MOD line modules. Supports 1 or 2 active + 1 redundant line module; includes blank panel IOA.
    REDMID-OC/5/1 Redundancy midplane for OC3/OC12-ATM and ERX-OCXA256M-MOD line modules. Supports 1, 2, 3, 4, or 5 active + 1 redundant line module; includes blank panel IOA.
  • Juniper ERX Series Power Supplies
    • Part Number Description Get Quote
    ERX-2400-PWR MP2400 Power Supply System - 19 wide, 3u high includes(3) MP2400 power supplies (ERX-RECT-PWR) and a power distribution panel (ERX-DIST-PNL-PWR).
    EX3-ACPWR-FRU ERX-310 AC power supply - AC power supply for the EX3-BS310AC-SYS, requires region-specific power cable.
    PDU Replacement or spare power distribution unit. Fits either ERX-700 or ERX-1400 chassis.
    PW-1110 Sorensen 1000 watt 110 volt AC fixed power supply
    PW-1220 Sorensen 1000 watt 220 volt AC fixed power supply
    PW-3001 Power supply 100-240 VAC 20 amp power supply for PW-3000
  • Juniper ERX Series Memory
    • Part Number Description Get Quote
    ERX-1GSRP40-UPG 1GB memory upgrade package for the 40Gb SRP. This item consists of (2) 512MB SDRAM chips which can be added to 40Gb SRPs to increase the total memory capacity to 2GB.
    ERX-F1G10G-FRU 1GB flash card for the 5G & 10G SRPs with 2G memory.
    ERX-F1G40G-FRU 1GB flash card for the 40G SRP with 2G memory.
    ERX-F1GE310-FRU 1GB flash card for the ERX-310 SRP.
    ERX-F512M10G-FRU 512MB flash card for the 5G & 10G SRPs with 1G memory.
    ERX-F512M40G-FRU 512MB flash card for the 40G SRP with 1G memory.
    ERX-GEFE256M-UPG Memory Upgrade Kit: includes 256MB memory (1 X 256MB SODIMM) to upgrade a 128MB GE/FE-8 line module to 256MB.
    ERX-OCXA256M-UPG Memory Upgrade Kit: includes 256MB memory (1 X 256MB SODIMM) to upgrade a 128MB OC3/OC12-ATM line module to 256MB.
  • Juniper ERX Series SFP Modules
    • Part Number Description Get Quote
    RX-10KM-SFP 1-port 10KM GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet single mode (10 KM) physical port with an LC full duplex connection. Works with ERX-GIGESFP-IOA.
    RX-550M-SFP 1-port 550M GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet multimode (550 M) physical port with an LC full duplex connection. Works with ERX-GIGESFP-IOA.
    RX-70KM-SFP 1-port 70KM GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet single mode (70 KM) physical port with an LC full duplex connection. Works with ERX-GIGESFP-IOA.
    RX-FXMM-SFP 1-port 2KM FE SFP Adapter: provides (1) small form-factor pluggable (SFP) Fast Ethernet multimode (2 KM FX) physical port. SC connector type.  Works with ERX-8FXSFP-IOA.
    RX-FXSM-SFP 1-port 10KM FE SFP Adapter: provides (1) small form-factor pluggable (SFP) Fast Ethernet single mode (10 KM LX) physical port.  SC connector type.  Works with ERX-8FXSFP-IOA.
    RX-GET-SFP 1000Base-T GE SFP for all E-Series GE IOAs that accept pluggable interfaces (uses Cat 5 cable with RJ45 connector).
    SFP-1OC48-IR OC48/STM16 pluggable transceiver (SFP) - intermediate range.
    SFP-1OC48-LR OC48/STM16 pluggable transceiver (SFP) - long range.
    SFP-1OC48-SR OC48/STM16 pluggable transceiver (SFP) - short range.
    SFP-GE10KT13R14 1-port 10KM Bidirectional GE SFP Adapter (TX1310nm / RX1490). Works with all E-Series Ethernet IOAs that accept pluggable adapters (SFPs).
    SFP-GE10KT13R15 1-port 10KM Bidirectional GE SFP Adapter (TX1310nm / RX1550). Works with all E-Series Ethernet IOAs that accept pluggable adapters (SFPs).
    SFP-GE10KT14R13 1-port 10KM Bidirectional GE SFP Adapter (TX1490nm / RX1310nm). Works with all E-Series Ethernet IOAs that accept pluggable adapters (SFPs).
    SFP-GE10KT15R13 1-port 10KM Bidirectional GE SFP Adapter (TX1550nm / RX1310nm). Works with all E-Series Ethernet IOAs that accept pluggable adapters (SFPs).
    SFP-GE40KM 1-port 40KM GE SFP Adapter: provides (1) small form-factor pluggable (SFP) Gigabit Ethernet single mode (40 KM) physical port with an LC full duplex connection. Works with all E-Series Ethernet IOAs that accept pluggable adapters (SFPs).
    SFP-GE40KT13R15 1-port 40KM Bidirectional GE SFP Adapter (TX1310nm / RX1490/1550nm). Works with all E-Series Ethernet IOAs that accept pluggable adapters (SFPs).
    SFP-GE40KT15R13 1-port 40KM Bidirectional GE SFP Adapter (TX1550nm / RX1310nm). Works with all E-Series Ethernet IOAs that accept pluggable adapters (SFPs).
    SFP-OC12-IR OC12/STM4 pluggable transceiver (SFP) - intermediate range.
    SFP-OC12-LR OC12/STM4 pluggable transceiver (SFP) - long range.
    SFP-OC12-SR OC12/STM4 pluggable transceiver (SFP) - short range.
    SFP-OC3-IR Small Form Factor Pluggable OC3 Inermediate Reach (IR) SM Optic Module - 15Km
    SFP-OC3-LR Small Form Factor Pluggable OC3 Long Reach (SR) SM Optic Module - 40Km
    SFP-OC3-SR Small Form Factor Pluggable OC3 Short Reach (SR) MM Optic Module - 2Km
  • Juniper ERX Series XFP Modules
    • Part Number Description Get Quote
    XFP-10GE-ER 10GE 40km single-mode pluggable interface
    XFP-10GE-LR 10GE XFP pluggable transceiver; singlemode 1310nm 10km reach
    XFP-10GE-SR 10GE short reach multi-mode pluggable interface
  • Juniper ERX Series Accessories
    • Part Number Description Get Quote
    ACC-EARS-19-1400 19 inch ears to mid-mount the 1400 into a telco rack
    ACC-EARS-23-1400 23 inch ears to rack mount the 1400 into a telco rack. Supports both front and mid-mount
    ACC-EARS-23-700 23 inch ears to rack mount the 700 into a telco rack, supports both front and mid-mount
    BALUM-B BNX Breakout panel, BNX Breakout panel for 20 Port Channelized E1 Adapter (Telco)
    ERX-19EAR700-ACC 19 inch ears to mid-mount the 700 into a telco rack
    ERX-FAN14-FRU Replacement fan for ERX-1400 (i.e., all 14-slot chassis).
    EX3-ACPSBLNK-PNL ERX-310 Power Supply Blank Panel Cover - blank panel cover for unused AC power supply slots in a EX3-BS310AC-SYS.
    EX3-ACPSDIST-PNL ERX-310 AC Power Distribution Panel (PDU) - power distribution panel for the EX3-BS310AC-SYS.
    EX3-DCPSDIST-PNL ERX-310 DC Power Distribution Panel (PDU) - power distribution panel for the EX3-BS310DC-SYS.
    EX3-FANTRAY-FRU ERX-310 Fan Tray Module - fan tray module for the EX3-BS310AC-SYS and EX3-BS310DC-SYS systems.
    EX7-CBMGTBKT-FRU External cable management bracket for the ERX-700 series. Side mounts to ERX-700 series chassis to support IOA cables. Comes with two mounting screws.
    FAN-7 Replacement fan for 7 slot chassis
    FILTER-14 P/C RX1400 Air Flter
    PANEL-I/O ERX-700/1400 I/O Filler panel for empty I/O slot in ERX-700 or ERX-1400 Chassis
    PANEL-LM ERX-700/1400 Line Module Filler panel for empty Line Module slot in ERX-700 or ERX-1400 Chassis
    PANEL-SRP ERX-700/1400 SRP Filler panel for empty SRP slot in ERX-700 or ERX-1400 Chassis
    PLENUM-1 Air Exhaust plenum filler panel to ensure proper air exhaust when two ERX units are installed in a 7? or ETSI rack
    PNL-RDMD-OCX Blank panel to companion an OCx redundancy midplane
    RX-SCLCMM50-ACC Converter cable, SC-LC, Multimode, 50 micron, 1 foot long
    RX-SCLCMM62-ACC Converter cable, SC-LC, Multimode, 62.5 micron, 1 foot long